Publications

L. Bereuter, S. Williner, F. Pianezzi, Bissig B, S. Buecheler, J. Burger, R. Vogel, A. Zurbuchen, A. Haeberlin. “Energy harvesting by subcutaneous solar cells: A long-term study on achievable energy ourput“. Annals of Biomedical Engineering, Volume 45, Issue 5, pp 1172–1180 (2017). doi: 10.1007/s10439-016-1774-4

R. Lockhart, F. Friedrich, D. Briand, P. Margairaz, J. –P. Sandoz, J. Brossard, H. Keppner, W. Olson, T. Dietz,Y. Tardy, H. Meyer, P. Stadelmann, C. Robert, A. Boegli, P.-A. Farine, N. F. de Rooij and J. Burger. “Silicon micromachined ultrasonic scalpel for the dissection and coagulation of tissue”. Biomedical Microdevices (ISSN: 1572-8781), vol. 17, num. 4 (2015) doi:10.1007/s10544-015-9981-6

T. Bork, R. Crivelli, Y. Tardy, J.Burger “Assessment of telemetry and fluidic control system used in the Medstream programmable infusion system: an in vivo and in vitro study” Biomed Microdevices (2014) doi:10.1007/s10544-014-9882-0

A. Hogg, S. Uhl, F. Feuvrier, Y. Girardet, B. Graf, T. Aellen, H. Keppner, Y. Tardy, J. Burger. “Protective multilayer packaging for long-term implantable medical devices”. Surface & Coatings Technology (2013), doi:10.1016/j.surfcoat.2014.02.070

A. Hogg, T. Aellen, S. Uhl, B. Graf, H. Keppner, Y. Tardy and J. Burger. “Ultrathin layer packaging for implantable electronic Devices“. Journal of Micromechanics and Microengineering, 23 (7) 075001 (2013)

C. Reutlinger, P. Gédet, P. Büchler, J. Kowal, T. Rudolph, J. Burger, K. Scheffler, and C. Hasler. „Combining 3D tracking and surgical instrumentation to determine the stiffness of spinal motion segments: A validation study”. Medical engineering & physics 33 (3) 340-346 (2011)

S. Ambrosetti, P. Gedet, S. Ferguson, J. Burger. "Viscoelastic properties of the sheep posterior spinal ligaments". Clinical Biomechanics 25 (2), 97-102 (2010)

T. Bork, A. Hogg, M. Lempen, D. Mueller, D. Joss, T. Bardyn, P. Buechler, H. Keppner, M.v. Waldkirch, Y. Tardy and J. Burger. “Development and in-vitro characterization of an implantable flow sensing transducer for hydrocephalus”. Biomed Microdevices 12 (4), 607–618 (ISBN 1387-2176) (2010)

J . R. Davis, M. G. Carpenter, R. Tschanz, S. Meyes, D. Debrunner, J. Burger, J. H.J. Allum. “Trunk sway reductions in young and older adults using multi-modal biofeedback”. Gait & Posture 31, p. 465–472 (2010)

S. Ambrosetti-Giudici, A. Pfenniger, M. H. Krenn, W. P. Piotrowski, S. J. Ferguson, J. Burger. “Surgical instrumentation for in vivo biomechanical characterization of the human lumbar spinal segment”. Medical Engineering and Physics 31 (9), 1063-1068 (2009)

J. Burger, Simon Meyes, Roger Tschanz, Justin R Davis, Marc G Carpenter, Daniel Debrunner und John HJ Allum. “Multi-modales Biofeedback System zur Vorbeugung vor Stürzen“. at-Automationstechnik, 56 (2008) 9, S. 467-475 (2008)

M. H. Krenn, S. Ambrosetti-Giudici, A. Pfenniger, J. Burger, W. P. Piotrowski, “Minimally Invasive Intraoperative Stiffness Measurements of Lumbar Spinal Motion Segments“. Neurosurgery 63 (4): Operative Neurosurgery Suppl. 2: 309 – 314, (2008)

X. Larrea, C. de Courten, V. Feingold, J. Burger, P. Büchler. “Computational Modeling of Oxygen and Glucose Distribution after Intracorneal lens Implantation”. Optometry & Vision Science. 84 (12),1074-1081, 2007

M. Loeffel, P.F. Heini, N. Bouduban, J. Burger, L.-P. Nolte, J. Kowal. ”Development of a Computer Assisted High Pressure Injection Device for Vertebroplasty”. IEEE Transactions in Biomedical Engineering, 54 (10), p. 2051-2056, November 2007

P. Büchler, A. Simon, J. Burger, A. Ginggen, R. Crivelli, Y. Tardy, R. Lüchinger and S. Olsen. ”Safety of a Programmable Implantable Drug Pump during MRI Examinations: A Finite Element Analysis “. IEEE Transactions on Biomedical Engineering, 54 (4), p. 726-733, 2006

Ch. Stieger , H. Bernhard, D. Wäckerlin, M. Kompis, J. Burger, R. Häusler. ”Human temporal bones versus mechanical model to evaluate three middle ear transducers”. Journal of Rehabilitation Research and Development, 44 (3) p.407-415, 2007

C. Stieger, D. Wäckerlin, H. Bernhard, A. Stahel, M. Kompis, R. Häusler, J. Burger. "Computer assisted optimization of an electromagnetic transducer design for implantable hearing aids", Comput. Biol. Med. 34(2), p.141-152, March 2004

S.M. Pimenov, A.A. Smolin, E.D. Obraztsova, V.I. Konov, U. Bögli, A. Blatter, E.N. Loubnin, M. Maillat, A. Leijala, J. Burger, H.E. Hintermann. „Tribological properties of smooth diamond films", Applied Surface Science 92, 106 (1996)

S.M. Pimenov, A.A. Smolin, E.D. Obraztsova, V.I. Konov, U. Bögli, A. Blatter, M. Maillat, A. Leijala, J. Burger, H.E. Hintermann, E.N. Loubnin. „Tribological Behaviour of smooth diamond films" , Surface and Coatings Technology 76-77, 572 (1995)

P. Martinoli, B. Jeanneret, V. Tsaneva, T. Luthy, D. Ariosa, Ch. Leemann, Ph. Lerch, J. Burger. ”A technology for 2-dimensional HTS Josephson junction arrays”. Bulgarian Journal of Physics 01/1995; 22(1/2):44.

Ph. Niedermann, W. Hänni, N. Blanc, R. Christoph, J. Burger. „Chemical vapor deposition diamond for tips in nanoprobe experiments", J. Vac. Sci. Technol. A 14 3, 1233 (1996)

U. Bögli, A. Blatter, S.M. Pimenov, E.D. Obraztsova, A.A. Smolin, M. Maillat, A. Leijala, J. Burger, H.E. Hintermann and E.N. Loubnin, „Tribological properties of smooth polycrystalline diamond films", Diamond and Related Materials 4, 1009 (1995)

V. Tsaneva, Th. Luthy, B. Jeanneret, Ph. Lerch, D. Ariosa, J. Burger, Ch. Leemann, P. Martinoli, „Fabrication of step edge YBa2Cu3O7-d Josephson junction arrays", Physica C 235-240, 3319 (1994)

J. Burger, G. Dietler, M. Binggeli, R. Christoph and O. Marti. „Aspects of the surface roughness of ceramic bonding tools on a nanometer scale investigated with Atomic-Force-Microscopy", Thin Solid Films 253, 308 (1994)

T. Amrein, B. Kabius, J. Burger, G. Saemann-Ischenko, L. Schultz and K. Urban. „Microstructure investigations of the epitaxial growth of ultrathin Bi2Sr2Ca1Cu2Ox - superconducting films on (001) SrTiO3 substrates", J. of Alloys and Compounds 195, 129 (1993)

P. Bauer, C. Giethmann, M. Kraus, T. Marek, J. Burger, G. Kreiselmeyer, S. Skibowski and G. Saemann-Ischenko, „Depth sensitive visualization of irradiation induced columnar defects in the layered superconducter 2H--NbSe2 via scanning probe microscopy", Europhys. Lett. 23, 585 (1993)

W. Schindler, P. van Hasselt, P. Tontsch, J. Markl, J. Burger, P. Bauer and G. Saemann-Ischenko, „Molecular Beam Epitxy of precipitation free high temperature SmBa2Cu3O7-d -superconductor thin films with small surface roughness", J. Cryst. Growth 127, 1088 (1993)

J. Burger, M. Lippert, W. Dorsch, P. Bauer and G. Saemann--Ischenko „Observation of the early stages of growth and the formation of growth spirals in epitaxial YBa2Cu3O7-d thin films by AFM", Appl. Phys. A 58, 49 (1994)

J. Burger, P. Bauer, M. Veith and G. Saemann-Ischenko „Scanning tunneling microscopy of surface properties of epitaxial YBa2Cu3O7-d - and Bi2Sr2Ca1Cu2O8+d -high-Tc thin films prepared by different methods" , Ultramicroscopy 42-44, 721 (1992)

J. Burger, S.C. Meepagala and E.L. Wolf „Wide range temperature compensated cryogenic Scanning Tunneling Microscope", Rev. Sci. Instrum. 60, 735 (1989)

J. Burger, G. Saemann-Ischenko and H. Adrian „Inelastic-Electron-Tunneling-Spectroscopy of Derivates of Benzoic Acid and Effects due to Irradiation with 3 MeV Protons at 4.2K" , Jap. J. Appl. Phys. 26, 763 (1987)